|
关键字:
IC卡ID卡接触式IC卡感应式IC卡射频IC卡电话IC卡
Keyword:
IC card ID card contactless IC card contactless IC card RF
IC card telephone IC card
技术支持/
制卡注意事项 Technical support / card system for
the attention
PVC卡下单时，有哪些注意事项？ PVC
card orders, pay attention to what matters?
1）打码：可打平码、喷码、小凸码、大凸码等。
1) a Code: Code can play Ping, Fen Ma, small convex yards, the
convex codes. 大小凸码可烫金或烫银。 Convex
code size can be hot or gilt silver. 注意凸码不可以竖排，非标卡不能打凸码，亚光卡(磨砂卡)不可以打平码。
Convex yards attention not Shubai, non-standard cards can not fight
convex yards, Matt card (Matte card) can not play-yards.
2）如果需要丝印金底或丝印银底请特别说明，如没有特别说明，我们只能按设计颜色直接印制。
2) If you need silk screen at the end of the silver or silk screen
at the end of the special requests, such as lack of specific, we can
only directly by design color printing.
3）卡的厚度：如果没有特别说明，我们一律印制标准厚度（0.76mm）。
3) the thickness of cards: If there are no special explanation, we
are printing standard thickness (0.76 mm).
4）因为每一次印刷是有一定色差的。 4)
because every time there is a certain color printing of.
如果有样卡，会以样卡为主，印刷时尽量接近样卡的颜色，但也不可能达到100%。
If there is kind cards, like cards will be mainly printing cards as
close as possible like the color, but it is impossible to achieve
100%. 如果客户对颜色要求非常严格，卡的数量又比较大，在货期允许的情况下应先打铜版纸以确认印刷效果。
If a customer colours very strict, the number of cards is relatively
large, in the cargo under the permission of the period should be a
good gloss to confirm that the printing results. 量少的单（1万张以下）是拼版印刷的，色差有90%以内视为正常。
Less single-(10,000) in the make-up print, in color as 90% less than
normal.
5）卡最后印刷出来的颜色效果跟在电脑显示器上看的颜色效果有一定的差异性，即使同一个设计稿件在不同的显示器上看效果也会有所不同{例如在液晶显示器（LCD）上看和在普通显示器（CRT）上看就有所不同。
5) card printing out the color of the final results on the computer
monitor with the terms of a certain color effect of the differences,
even if with a different design Gaojian effect will be on display
different perspective (For example, in the liquid crystal display
(LCD) see and in the general display (CRT) perspective is somewhat
different.
6）非标卡需另外开模，工期较长而且需另加模具费。
6) other non-standard card to open mode, and are subject to a longer
time limit for mold.
7）凸码不能竖打（即凸码不能与卡的短边平行，只能与长边平行）。
7) can not erect a convex code (code that is convex and not the
short side parallel card, only with long edge parallel).
8）IC（ID）卡必须说明采用什么样的芯片（芯片型号）、卡的厚度(厚卡\中厚卡\薄卡)、要白卡还是成品卡(包括印刷)等。
8) IC (ID) card must specify what kind of chips (chip models), card
thickness (thick card \ thick card \ thin card), white card or
finished cards (including printing).
9）亚光（磨砂）、加镭射、用透明料、加包装袋等需加收费用，下单时应特别说明。
9) Matt (scrub), plus laser, using transparent materials, and
packaging bags are subject to fees under the single should be
specified.
10）PVC卡的设计尺寸88.5mm×57
mm（含出血位），成品尺寸为85.5mm×54 mm。 10) PVC Card Design Dimensions
88.5 mm × 57 mm (including bleeding), finished size of 85.5 mm × 54
mm.
11）文件的格式为CORLDRAW(*.cdr)、PHOTOSHOP(*.psd需要没有合并图层之前的文件)、Illustrato(*.ai)r。
11) CORLDRAW document format (*. cdr), PHOTOSHOP (*. psd layers need
not before the merger), Illustrato (*. ai) r. |
